Stiffness without bulk
Rib and gusset patterns from the design guide.
Stiffness without bulkIndustrial and Transportation
Industrial and transportation components built for duty cycles
Large covers and structural plastics see vibration, temperature swings, and abuse. Geometry and ribs carry loads, not wishful wall thickness.
Industrial and Transportation
Industrial and transportation components built for duty cycles
Large covers and structural plastics see vibration, temperature swings, and abuse. Geometry and ribs carry loads, not wishful wall thickness.
Convert metal brackets to plastic only when stiffness and creep are modeled with rib support.
Transportation programs need consistent ejection and gate plans on long flow paths.
Upload mating hardware and torque paths so DFM review is meaningful.
Manufacturing
Quote with sector context on the model
Upload CAD so DFM and material assumptions match how the part is used.
- Note environment: UV, chemicals, or wear surfaces.
- Call out cosmetic faces versus functional mates.
- List expected annual volume even if it is a range.
Industrial and Transportation
Why NetProto for industrial and transportation programs
Sector priorities mapped to how we quote production tooling.
Metal to plastic
Conversion checklist before quoting.
Metal to plasticDefect avoidance
Warp and sink on large industrial panels.
Defect avoidanceApplications
Common molded part types
Use this list to frame your upload notes.
Heavy equipment covers and access panels
Fleet vehicle interior and exterior trim
Material handling and logistics components
Industrial control housings
Workflow
From CAD to repeat production
One hardened steel tool per approved part on qualified programs.
- 1
Model loads and environment
Note vibration, temperature, and chemical exposure.
- 2
DFM on large parts
Review draft, ribs, and gate location.
- 3
Order production tooling
Hardened steel for approved designs.
- 4
Fleet repeat builds
Same mold, flexible order sizes.
Related resources
Program context
Links stay on published hubs only.
Industries hub
All sector pages in one index.
Industries hubDesign guide
DFM rules before tooling.
Design guideMaterials library
Resin guides for your sector.
Materials libraryAutomotive overlap
Light vehicle programs.
Automotive overlapRenewable fleets
Energy sector hardware.
Renewable fleetsMolded parts library
Part level design notes.
Molded parts libraryWheel hubs
Bearing seats and spokes that hold round under load.
Wheel hubsCasters
Wheels, forks, and swivel housings in molded plastic.
CastersAutomotive clips and fasteners
Push pins and panel clips that hold through vibration.
Automotive clips and fastenersIndustrial equipment
Covers, guards, and machine parts.
Industrial equipmentMarine
Deck hardware and sealed boxes near salt water.
MarineRail
Interior parts and long life spares.
RailApplications
Typical molded programs
Forge media library images illustrate common part families.
Injection molded part for industrial transportation programs
Injection molded part for industrial transportation programs
Engineer reviewing molded component design
Engineer reviewing molded component design
Production plastic housing on inspection fixture
Production plastic housing on inspection fixture
FAQ
Buyer questions
Are glass filled grades required?
Note structural needs on upload. Material library lists common families.
Can you mold very large covers?
Size affects tool and press assumptions. CAD defines the conversation.
Next step
Move your industrial component into production
Upload CAD with load and environment notes for a production tooling quote.