Skip to content
NetProto

Quote sequence

DFM and Mold Pricing Before You Lock the Material

Teams often need tooling budget approval while resin selection is still in parallel with supplier samples.

Get Instant QuoteInstant quote

Quote sequence

Material pending is valid on early quotes

Geometry and tooling assumptions can start before the final TDS row is frozen.

Teams often need tooling budget approval while resin selection is still in parallel with supplier samples.

Gray CAD-style enclosure prototype part with draft-friendly ribs on light gray studio.

Upload CAD with a performance filter and mark material as pending in quote notes so DFM can proceed on geometry.

Changing resin later may require shrink and fill revalidation even when steel stays the same.

Quote checklist

Pending material RFQ

Copy these fields into your RFQ or instant quote notes.

  • 3D CAD at quote revision

  • Performance filter (heat, impact, chemical)

  • Two candidate families if known

  • Note material pending explicitly

Examples

What you can learn early

Weak callouts widen assumptions; specific grades tighten quotes.

FieldToo vagueBetter
DFMDraft, ribs, undercutsBefore resin lock
Tooling directionSteel quote assumptionsBefore resin lock
Piece priceTightens after gradeAfter resin lock

Instant quote

Quote workflow

NetProto quote flow: upload, specify assumptions, review, submit.

  1. 1

    Upload geometry

    STEP with revision.

  2. 2

    Notes: material pending

    List filters and candidates.

  3. 3

    Request DFM review

    Link injection molding DFM article internally.

  4. 4

    Lock grade before production

    Update quote notes and PO.

FAQ

FAQ

Will piece price change after resin lock?

Yes, resin and cycle assumptions update with grade.

Can tooling quote stay fixed?

Only if later resin fits the validated shrink window.

DFM without material?

Geometry issues are visible; fill and warp need resin for final sign-off.

Related

More RFQ guides

Links render in cards blocks only.

Next step

Start with CAD and material notes

Use the instant quote platform for pricing visibility tied to your geometry.

Upload CAD for an instant quoteGet Instant Quote
DFM and Mold Pricing Before You Lock the Material | NetProto